What is the difference between the model and specification of overweight hexagonal mesh machine

The opening mode of overweight hexagonal mesh machine is divided into some dynamic, manual, continuous playing, ball power switch and button switch. Just press the button to actively pack, saving time and labor. Fully active intelligent automatic packer: no manual belt insertion, just setting: actively carry out the whole process of belt gathering, bonding, disconnection and belt exit according to the requirements.
1-5 bales can be customized, with a speed of 2.0 seconds / pass. The clamping pin of the lower swing arm of the automatic packer needs to be smooth. The clamping machine and equipment of the lower swing arm of the automatic packer are fixed by a clamping pin. If the clamping pin is applied for a long time, it is not smooth, and the lower swing arm is not smart enough, the tape will also occur. This requires the application staff to carry out regular maintenance for the equipment, oil supply, and the torsion spring of the lower swing arm is too tight.
The lower arm tissue is the binding tissue of the automatic packer. If the torsion spring of the lower arm is adjusted too tightly, the lower arm will become more rigid and less dexterous in the process of work. The plastic packing belt is a simple cassette. If the cassette is generated for this reason, the equipment will actively carry out the packing process of belt gathering, bonding, breaking and belt out. Because each commodity needs manual actual operation, Therefore, the relative efficiency is low. You only need to loosen the tension spring of the lower swing arm.